GÉNIE CIVIL
| CVG1107 | Civil Engineering Graphics and Seminars | (3,3,3) 3 cr. |
| Fundamentals of graphical communications. Sketching, orthographic projections, sectional views, basic dimensioning, axonometric drawings, auxiliary views, relationships between lines and planes in space, intersections and developments, fasteners, AutoCAD. Drawing of points, lines, curves, splines, 2D views (with dimensions) and 3D views on AutoCAD. Use of Layers. A project using AutoCAD. Seminars in Civil Engineering practice including ethics, environmental obligations and workplace health and safety. | ||
| Haut | ||
| CVG1507 | Dessin industriel et séminaires en génie civil | (3,3,3) 3 cr. |
| Notions fondamentales en communication graphique. Exécution de croquis, projections orthographiques, sections, représentations axonométriques, vues auxiliaires, relations entre lignes et surfaces dans l'espace, lignes d'intersections et développement, éléments d'attache. AutoCAD. Dessin des points, lignes, courbes, splines, vues en 2D (avec cotations) et des vues en 3D. Utilisation des niveaux. Un projet utilisant AutoCAD. Séminaires consacrés à divers sujets dans la pratique de génie civil incluant l'éthique professionnelle, les obligations en matières d'environnement et les aspects de santé et sécurité au travail. | ||
| Haut | ||
| CVG2107 | Geotechnical Materials and Processes | (3,0,3) 3 cr. |
| Nature and behaviour of materials forming earth's crust: their formation and alteration due to action of ice, water, and wind; glaciation; land heave; permafrost; residual soils. Basic physical properties of soils: structure; index properties; grain size and visual identification; consistency limits; organic content; classification; compaction; capillarity; shrinkage and swelling; water in soil. | ||
| Haut | ||
| CVG2116 | Introduction to Fluid Mechanics | (3,1.5,3) 3 cr. |
| Fluid statics, atmospheric stability, properties of fluids. Kinematics of fluids, analysis by continuity, energy and momentum equations. Applications of one-dimensional method to flow in pipelines, flow measurement, dynamic forces and turbo machines. Laminar and turbulent pipe flow; energy losses in pipe flow and open channel flow. Viscous and form drag in fluid flow; role of boundary layer in drag. Similitude and dimensional analysis with application to hydraulic models. | ||
| Prerequisites: GNG1105, MAT1322, PHY1122. | ||
| Haut | ||
| CVG2132 | Fundamentals of Environmental Engineering | (3,1.5,2.5) 3 cr. |
| An introductory study of environmental resources and their use. Relations and cycles within ecosystems. The causes, monitoring and correction of pollution of environmental systems. Water quality. Examination of water and wastewater for physical, chemical and biological characteristics. | ||
| Prerequisite: CHM1311. | ||
| Haut | ||
| CVG2140 | Mechanics of Materials I | (3,1.5,1.5) 3 cr. |
| Stress and strain, mechanical properties of materials, bending moment and shear force diagrams; stresses and deformations in members subjected to tension, compression, shear and torsion; flexural and shearing stresses in beams; deflection of beams; combined stresses. | ||
| Prerequisite: GNG1105. | ||
| Haut | ||
| CVG2141 | Civil Engineering Materials | (3,3,2) 3 cr. |
| Chemical, physical and mechanical properties of steels. Concrete materials and mix design. Properties of fresh and hardened concrete. Structure, properties and utilization of timber. | ||
| Prerequisite: CHM1311. | ||
| Haut | ||
| CVG2149 | Civil Engineering Mechanics | (3,2,0) 3 cr. |
| Basic concepts of engineering mechanics applicable to civil engineering. Analysis of statically determinate beams, trusses and cables. Conservation of energy, principle of impulse and momentum, angular momentum, and impact for particles and systems of particles. Kinematics of particles, system of particles and rigid bodies. D'Alembert's principle. | ||
| Prerequisites: GNG1105, MAT1322, PHY1122. | ||
| Haut | ||
| CVG2171 | Surveying and Measurements | (3,1.5,4) 3 cr. |
| Theory and technique of linear and angular measurements in plane surveying. Surveying instruments: Level, Theodolite, EDM and Total Station. Topographic surveys and mapping. Astronomical observations: solar and star (Polaris) observations. Route surveying: horizontal and vertical curves. Measurements of volumes. Principles of photogrammetry. Includes field work on practical applications of measurement theories using surveying equipment | ||
| Haut | ||
| CVG2181 | Numerical Modelling in Civil Engineering | (3,1.5,2) 3 cr. |
| Development of computer programs in environmental geotechnical, structural and water resources engineering fields. Formulation of ordinary and partial differential equations with particular emphasis on civil engineering problems. Use of both microcomputers and mainframe facilities will be emphasized. | ||
| Prerequisites: (GNG1106 or ITI1120), MAT2322, MAT2384. | ||
| Haut | ||
| CVG2507 | Matériaux et processus géotechniques | (3,0,3) 3 cr. |
| Nature et comportement des matériaux formant la croûte terrestre : leur formation et altération par l'action de la glace, de l'eau, du vent; glaciation; soulèvement terrestre; pergélisols; sols résiduels; structure; propriétés physiques fondamentales des sols; indices de propriétés; granulométrie et identification visuelle; limites de consistance; composition organique; classification; compactage; capillarité; retrait et gonflement; l'eau dans le sol. | ||
| Haut | ||
| CVG2516 | Mécanique élémentaire des fluides | (3,1.5,3) 3 cr. |
| Hydrostatique, stabilité de l'atmosphère, les caractéristiques des fluides; kinématique des fluides, analyse par les méthodes de continuité d'énergie et d'impulsion. Applications de la méthode unidimensionnelle au débit en tuyaux, mesure des débits, forces dynamiques et machines hydrauliques; débit tranquille et turbulent (en tuyaux); pertes d'énergie pour les débits en tuyaux et aux canaux à ciel ouvert; résistance aux fluides dûe à la viscosité et à la forme. Rôle de la couche superficielle en résistance; similitude et analyse dimensionnelle avec applications aux modèles hydrauliques. | ||
| Préalables : GNG1505, MAT1722, PHY1522. | ||
| Haut | ||
| CVG2532 | Principes fondamentaux du génie de l'environnement | (3,1.5,2.5) 3 cr. |
| Une étude introductive des resssources environnementales et de leur utilisation. Relation et cycles dans les écosystèmes. Bilan de matière et de l'énergie pour expliquer les phénomènes environnementaux. Les causes, la surveillance, la prévention et les mesures correctives de la pollution des systèmes environnementaux. Qualité de l'eau. Analyse de l'eau et des eaux usées en termes des caractéristiques physiques, chimiques et biologiques. Météorologie et dispersion des polluants dans l'atmosphère. | ||
| Préalable : CHM1711. | ||
| Haut | ||
| CVG2540 | Mécanique des matériaux I | (3,1.5,1.5) 3 cr. |
| Contrainte et déformation, propriétés mécaniques des matériaux, moment de flexion et effort tranchant; contraintes et déformations dues aux forces axiales, de flexion et de torsion; contraintes de flexion et de cisaillement dans les poutres; déflexions; contraintes combinées. | ||
| Préalable : GNG1505. | ||
| Haut | ||
| CVG2541 | Matériaux du génie civil | (3,3,2) 3 cr. |
| Propriétés chimiques, physiques et mécaniques des aciers. Matériaux constitutifs et formulation des bétons. Propriétés du béton frais et durci. Structure, propriétés et utilisation de bois de construction. | ||
| Préalable : CHM1711. | ||
| Haut | ||
| CVG2549 | Mécanique de génie civil | (3,2,0) 3 cr. |
| Concepts de base de génie mécanique appliqués au génie civil. Étude des poutres statiquement déterminées, des treillis et des câbles. Conservation de l'énergie. Principe de l'impulsion et de la quantité de mouvement. Moment angulaire et impact des particules et des systèmes de particules. Cinématique des particules, de système de particules et des corps rigides. Le principe de D'Alembert. | ||
| Préalables : GNG1505, MAT1722, PHY1522. | ||
| Haut | ||
| CVG2571 | Mesures et arpentage | (3,1.5,4) 3 cr. |
| Théorie et technique des mesures linéaires et angulaires. Instruments d'arpentage: niveau, théodolite, EDM et station total. Topographie et cartographie. Observations astronomiques solaires et astrales (Étoiles du Nord). Arpentage des routes: courbes horizontales et verticales. Mesures des volumes. Principes de la photogrammétrie. Travail pratique sur le terrain portant sur des mesures d'arpentage. | ||
| Haut | ||
| CVG2581 | Méthodes numériques en génie civil | (3,0,2) 3 cr. |
| Le développement de logiciels spécialisés dans les domaines de l environnement, de la géotechnique, des structures et des ressources hydriques. La formulation d'équations différentielles ordinaires et aux dérivées partielles avec un emphase sur la résolution de problèmes typiques en génie civil. Une attention particulière sera accordée à l application de ces outils au moyen de micro-ordinateurs ainsi que d ordinateurs centraux. | ||
| Préalables : (GNG1506 ou ITI1520), MAT2722, MAT2784. | ||
| Haut | ||
| CVG2901 | Stage coop I / CO-OP Work Term I | 3 cr. |
| Haut | ||
| CVG3106 | Soil Mechanics II | (3,1.5,1.5) 3 cr. |
| Review of soil properties; site investigation methods; bearing capacity of shallow foundations; allowable bearing capacity and settlement analysis; lateral earth pressures; retaining wall design; sheet pile walls and braced cuts; slope stability analysis. | ||
| Prerequisite: CVG3109. | ||
| Haut | ||
| CVG3109 | Soil Mechanics I | (3,1.5,2) 3 cr. |
| Fundamental characteristics of soils; total and effective stresses; permeability and seepage; stress and strain, shear strength; stress distribution; consolidation and settlements. | ||
| Prerequisites: CVG2107, CVG2140. | ||
| Haut | ||
| CVG3116 | Hydraulics | (3,1.5,2) 3 cr. |
| Review of fundamentals; flow in complex pipe systems; theory and operations of centrifugal pumps; gradually-varied open channel flows; backwater computations; flow measurements; unsteady flows; hydraulic models; sediment transport theory; introduction to wave theory. | ||
| Prerequisite: CVG2116. | ||
| Haut | ||
| CVG3120 | Hydrology | (3,1.5,2) 3 cr. |
| Hydrologic cycle; evaporation and transpiration; snow and snowmelt; infiltration; subsurface water; well hydraulics; stream flow; unit hydrograph and S-curve analysis of flood flows; river and reservoir routing techniques; statistics of extreme values. | ||
| Prerequisite: MAT2377. | ||
| Haut | ||
| CVG3132 | Physical / Chemical Unit Operations of Water and Wastewater Treatment | (3,1.5,2.5) 3 cr. |
| Water and wastewater treatment objectives. Theory and design of the fundamental physical/chemical unit operations for water and wastewater treatment. Flow regimes in reactors and mass balances. Unit operations: sedimentation, mixers, flocculation, mass transfer/aeration, filtration, softening and disinfection. | ||
| Prerequisites: CVG2116, CVG2132. | ||
| Haut | ||
| CVG3140 | Theory of Structures I | (3,1.5,2) 3 cr. |
| Analysis of statically determinate beams and frames. Deflections; moment-area method, conjugate-beam method, virtual work and energy methods. Analysis of statically indeterminate beams, frames and trusses; force method, flexibility method, slope-deflection method, moment distribution. Influence lines for beams, frames and trusses. Analysis of statically determinate cables and arches. Introduction to loads on structures. | ||
| Prerequisites: CVG2140, CVG2149. | ||
| Haut | ||
| CVG3141 | Mechanics of Materials II | (3,0,1.5) 3 cr. |
| Combined stresses; buckling; unsymmetric bending, composite beams, inelastic bending, plastic collapse of beams, shear flow, shear centre; vibrations; Castigliano's theorem; torsion of thin-walled closed and open sections, inelastic torsion. | ||
| Prerequisites: CVG2140, CVG2149, MAT2384. | ||
| Haut | ||
| CVG3147 | Structural Steel Design I | (3,1.5,2) 3 cr. |
| Design of statically determinate steel structures. Limit States Design. Properties of structural steel. Loads from building codes. Tributary area. Live-load-reduction factors. Tension members: Effective area, shear lags. Compression members: strength and stability. Beams: Plastic flexure, local and lateral torsional buckling, shear strength, deflection control, bearing resistance. Structural bolts in shear, tension, and in combination; prying action. | ||
| Prerequisites: CVG2141, CVG3140. Corequisite: MAT2377. | ||
| Haut | ||
| CVG3148 | Reinforced Concrete Design I | (3,0,2) 3 cr. |
| Behaviour and design of reinforced concrete members subjected to bending, shear and axial force. Analysis of reinforced concrete sections. Design of beams, one-way slabs, columns, bearing walls and retaining walls using the ultimate strength theory and the principles of limit states design. Introduction to prestressed concrete. Design of simple prestressed concrete beams. | ||
| Prerequisites: CVG2141, CVG3140. | ||
| Haut | ||
| CVG3509 | Méchanique des sols I | (3,1.5,2) 3 cr. |
| Caractéristiques fondamentales des sols; contraintes totales et effectives; perméabilité et infiltration; contraintes et déformations relatives, résistance au cisaillement; répartition des contraintes; consolidation et tassement. | ||
| Prealables : CVG2507, CVG2540. | ||
| Haut | ||
| CVG3516 | Hydraulique | (3,1.5,2) 3 cr. |
| Révision des principes fondamentaux; écoulement dans les systèmes complexes de conduites; théorie et opération de pompes centrifuges; écoulements à surface libre graduellement variés; calcul de courbes de remous; mesure de débit; écoulements non stationnaires; modèles hydrauliques; théorie de transport de sédiments; introduction à la théorie des vagues. | ||
| Préalable : CVG2516. | ||
| Haut | ||
| CVG3520 | Hydrologie | (3,1.5,0) 3 cr. |
| Cycle hydrologique; évaporation et transpiration; neige et fonte des des neiges; infiltration; eaux souterraines; hydraulique des puits; débit; analyse par hydrogramme unitaire et hydrogramme en S des débits d'inondation; techniques de routage en rivière et en réservoir; statistiques des valeurs extrêmes. | ||
| Préalable : MAT2777. | ||
| Haut | ||
| CVG3540 | Théorie des structures I | (3,1.5,0) 3 cr. |
| Analyse de poutres et cadres isostatiques. Calcul des flèches; méthode des moments d'aire, méthode de poutre conjuguée, travail virtuel et méthodes d'énergie. Analyse de poutres, cadres et treillis hyperstatiques; méthodes des forces, de flexibilité, des rotations, de distribution de moments. Lignes d'influence pour poutres, cadres et treillis. Analyse de câbles et arcs isostatiques. Introduction aux surcharges sur les structures. | ||
| Préalables : CVG2540, CVG2549. | ||
| Haut | ||
| CVG3547 | Conception des structures en acier I | (3,1.5,0) 3 cr. |
| Calculs et conception de structures isostatiques en acier. Calculs aux états limites. Propriétés de l'acier. Charges selon les normes de bâtiments. Aires tributaires. Facteurs de réduction des surcharges d'exploitation. Pièces en traction: section effective, décalage. Pièces en compression : résistance et comportement en stabilité. Poutres: moment plastique, voilement des sections à parois minces, déversement, résistance à l'effort tranchant, contrôle de déformations, résistance aux charges concentrées. Résistance des boulons en cisaillement, en traction et en cisaillement et traction combinés, effet de levier. | ||
| Préalables : CVG2541, CVG3140. Concomitant : MAT2777 | ||
| Haut | ||
| CVG3901 | Stage coop II / CO-OP Work Term II | 3 cr. |
| Haut | ||
| CVG3902 | Stage coop III / CO-OP Work Term III | 3 cr. |
| Haut | ||
| CVG4001 | Introduction à la conception en génie civil / Introduction to Civil Engineering Project | (3,0,1.5) 3 cr. |
| Introduction à la méthode de conception. Identification des critères et contraintes d'un projet. Génération des options de conception et sélection du meilleur concept. Compétences en gestion de projet telles que production d'un échéancier et allocation des ressources. Introduction to the design method. Identification of project criteria and constraints. Generation of design options and selection of preferred design. Project management skills, such as cost prediction, timeline evaluation and resource allocation. |
||
| Préalables : CVG3106, CVG3116, CVG3132, CVG3147, CVG3148. |
||
| Haut | ||
| CVG4108 | Geotechnical Design | (3,1.5,3) 3 cr. |
| Applications of soil mechanics theory to bearing capacity, settlement, and stability evaluation; design of foundations, retaining structures, embankments, and excavations; geotechnical exploration, reporting and spatial variability considerations; introduction to ground improvement. | ||
| Prerequisites: CVG3109, CVG3106. | ||
| Haut | ||
| CVG4110 | Hydraulics of Open Channels | (3,0,0) 3 cr. |
| Equations of open channel flow. Rapidly varied flow. Gradually varied flow in regular and natural channels. Unsteady flow. Application to flood waves and tides in natural channels. Turbulence and related diffusion phenomena. Sediment transport, bed and suspended load. Scour. | ||
| Prerequisites: CVG3116, CVG3120. | ||
| Haut | ||
| CVG4113 | Hydraulics of Water Supply and Sewer Systems | (3,1.5,3) 3 cr. |
| Population forecasting techniques. Design of network distribution systems for flow and pressure requirements, hydraulics of sewer junctions and transitions, measuring devices in urban water and sewer networks, pumps, and pumping stations, valves, hydrants. Environmental considerations. Fieldwork. | ||
| Prerequisite: CVG3116. | ||
| Haut | ||
| CVG4122 | Groundwater and Seepage | (3,0,0) 3 cr. |
| Types and physical properties of aquifers. Darcy's Law; hydraulic conductivity of isotropic, anisotropic, and multilayered soils; uniform flow, unidirectional and radial flow -- steady and unsteady flow nets; methods of images, partially penetrating wells; leaky aquifers; application of mapping techniques to seepage problems. | ||
| Prerequisites: CVG2116, CVG3109. | ||
| Haut | ||
| CVG4130 | Advanced Environmental Engineering | (3,1.5,0) 3 cr. |
| Water quality objectives; cell microbiology; bacterial energetics; biological treatment kinetics; design of conventional wastewater treatment systems (lagoons, activated sludge); design of advanced wastewater treatment systems (membrane bioreactors, and moving bed bioreactors). | ||
| Prerequisite: CVG2132. | ||
| Haut | ||
| CVG4133 | Solid Waste Management | (3,0,0) 3 cr. |
| Quantities and characteristics of municipal solid waste. Collection and transportation systems. Resource recovery. Solid waste separation processes. Energy recovery from municipal solid waste. Disposal methods. Environmental impacts of landfilling of solid waste. Environmental legislation and risk assessment. | ||
| Prerequisite: CVG2132. | ||
| Haut | ||
| CVG4142 | Structural Dynamics | (3,0,0) 3 cr. |
| Dynamic problems in civil engineering; single-degree-of-freedom system; free and forced vibrations; transient phenomena and Duhamel's integral; distributed mass system; seismic response of structures; multi-storey buildings; random vibration and wind-induced response of structures. | ||
| Prerequisites: CVG3140. | ||
| Haut | ||
| CVG4143 | Structural Steel Design II | (3,1.5,0) 3 cr. |
| Design of fully and partially composite beams. Beam-Columns design including local buckling, strength and stability interaction equations, biaxial bending, and bending and tension members. Plate girders design including ultimate shear strength, tension-field action, design of bearing and intermediate stiffeners, local buckling considerations, and flexural resistance. Second-order analysis techniques. | ||
| Prerequisites: CVG3147, CVG3148. | ||
| Haut | ||
| CVG4145 | Reinforced Concrete Design II | (3,1.5,0) 3 cr. |
| Extension of course CVG3148. Behaviour and design of reinforced concrete members, subjected to biaxial bending, torsion, lateral loads and two-way action. Two-way slab systems. Strip method, direct design approach and equivalent frame analysis of two-way slabs. Yieldline theory of slabs. Inelastic response of reinforced concrete structures and moment re-distribution. Earthquake resistant design. | ||
| Prerequisites: CVG3148. | ||
| Haut | ||
| CVG4146 | Structural Design in Timber | (3,1.5,1.5) 3 cr. |
| Timber engineering; species groups, stresses, load factors. Mechanical fasteners and adhesives. Preservative treatments; fire safety, design and analysis of timber structures. | ||
| Prerequisite: CVG3140. | ||
| Haut | ||
| CVG4148 | Theory of Structures II | (3,0,2) 3 cr. |
| Topics in structural analysis related to statistically indeterminate structures. Introduction to stiffness and flexibility coefficients; matrix formulation and computer programming to solve indeterminate structures such as trusses, continuous beams and tall building frames. | ||
| Prerequisites: CVG2181, CVG3140. | ||
| Haut | ||
| CVG4150 | Highway and Transportation Engineering | (3,1.5,1.5) 3 cr. |
| Importance of highways and transportation; urban transportation planning; driver, vehicle, and general traffic characteristics; traffic engineering and studies; highway capacity and level of service; highway location and geometric design; earthwork operations; highway drainage and subgrade structure; structural analysis and design of rigid and flexible pavements; economic analysis and evaluation of transportation systems. | ||
| Prerequisites: CVG2171, CVG2107, CVG2141. | ||
| Haut | ||
| CVG4173 | Construction Management | (3,0,0) 3 cr. |
| Planning and operation of construction project by the civil engineer, co-ordination and control of personnel, materials and machines, scheduling, estimation, purchasing cost control and other topics. Influence of construction procedures on civil engineering design processes. Common and civil law as applied to engineering contracts and specifications. | ||
| Prerequisites: CVG3106, CVG3147, CVG3148. | ||
| Haut | ||
| CVG4175 | Field Investigations and Environmental Impact Assessment of Civil Engineering Projects | (1.5,0,1.5) 3 cr. |
| Field investigations in geotechnical, water resources and environmental engineering. Experimental design, data acquisition, data analysis and site visits. Principles of environmental impact assessment of civil engineering projects. | ||
| Prerequisites: CVG2132, CVG3116, CVG3106. | ||
| Haut | ||
| CVG4180 | Special Directed Studies | (3,0,0) 3 cr. |
| Selected topics of special interest in civil engineering. | ||
| Prerequisite: Permission of the Department. | ||
| Haut | ||
| CVG4181 | Special Topics in Structural Engineering | (3,0,2) 3 cr. |
| Specialized course on a selected topic in structural engineering | ||
| Prerequisites: CVG3147, CVG3148. | ||
| Haut | ||
| CVG4184 | Special Topics in Geotechnical Engineering | (3,0,0) 3 cr. |
| Specialized course on a selected topic in geotechnical engineering. | ||
| Prerequisite: CVG3106. | ||
| Haut | ||
| CVG4186 | Special Topics in Water Resources Engineering | (3,0,0) 3 cr. |
| Specialized course on a selected topic in water resources engineering. | ||
| Prerequisites: CVG3116, CVG3120. | ||
| Haut | ||
| CVG4188 | Special Topics in Environmental Engineering | (3,0,0) 3 cr. |
| Specialized course on a selected topic in environmental engineering. | ||
| Prerequisites: CVG3116, CVG3120. | ||
| Haut | ||
| CVG4260 | Thesis | 6 cr. |
| Thesis on an approved research or design topic in Civil Engineering which will emphasize independent work. The thesis will be done under the direction of a faculty adviser and the student must obtain an adviser's approval before commencing the course. | ||
| Prerequisites: B average, permission of supervisor. | ||
| Haut | ||
| CVG4901 | Stage coop IV / CO-OP Work Term IV | 3 cr. |
| Haut | ||
| CVG4902 | Stage coop V / CO-OP Work Term V | 3 cr. |
| Haut | ||
| CVG4907 | Projet de conception en génie civil Civil / Engineering Design Project | (3,0,0) 3 cr. |
| Projet en génie civil sous la direction de conseillers membres du corps professoral pendant la dernière année du programme. Le projet doit être basé sur la connaissance et les qualifications conformes aux normes de conception, de législation, de sciences économiques, de santé et de sécurité, d'environnement et autres facteurs pertinents. Un accent particulier est mis sur l'expérience de travail en équipe et sur l'apprentissage dans un contexte créatif, itératif et ouvert. A civil engineering design project under the direction of faculty advisors for the final year of the program. The project is to be based on the knowledge and skills of design standards, legislation, economics, health and safety, environmental and other pertinent factors. A particular emphasis is placed on experience of teamwork and a creative, iterative and open-ended process. |
||
| Préalable : CVG4001. Prerequisite: CVG4001. |
||
| Haut | ||